Author Topic: [September 3, 2023]Abyss Patcher (Read 359160 times)

ShaggyZE · « **Reply #4775 on:** July 30, 2016, 06:51:28 pm »

it has to be early most likely before graphics card warning, but not to early to close the client obviously, if not just a little after the warning, i don't get the warning so i can't be sure.

Chocobubba · « **Reply #4776 on:** July 31, 2016, 12:41:29 am »

I'm not sure if this belongs here or in the Mod Sharker thread, but I thought I should post it somewhere at the very least. When I launch AbyssInjector while a client is already open (So, multiclienting) I get the following error if I'm chainloading Mod Sharker through abyss. (It still functions properly if you click continue though)

Microsoft .NET Framework
The process cannot acces the file mod_sharker.log because it's being used by another process.

ShaggyZE · « **Reply #4777 on:** July 31, 2016, 01:07:12 am »

mod_sharker was never designed for multiples instances for multi client, especially when loading in two instances that way, you may want to try waiting 5 minutes or so between loading client's when mod_sharker is no longer accessing the first log, but obviously an error that can be skipped since it doesn't rely on creating the log (and not being able to have acces to write to it) to work.

theanomaly · « **Reply #4778 on:** July 31, 2016, 11:14:04 am »

Finally got off my butt and tried out this Injector with the timer set to 5000.
Takes 2~3 tries but it still functions!
Thanks so much. I honestly was too lazy to try and use more external software but I just could not take the limited zooming, and not being able to change to the same channel. The glare and font is also a huge eyesore.

The feels, man.

bigonemclargehuge · « **Reply #4779 on:** July 31, 2016, 02:54:56 pm »

Going to chime in:

Abyss working 100%, and I'm using abyss with UO tiara moonshine, using MabiPacker to apply it. I set the injector timer to 500 ms, and detection time to 500 ms. Never been detected. It's never messed up once. What are all these people setting the timer to 5000 ms? I'm curious why people are doing this. Maybe it's because my computer is really fast that I'm able to run abyss without any problems.

scott · « **Reply #4780 on:** July 31, 2016, 06:57:13 pm »

I get this after i open up AbyssInjector.exe https://puu.sh/qlmfj/574dfa5955.png , it lets me continue though and then the injector cannont find the DLL https://puu.sh/qllQw/9e4e7e6714.png , am i doing something wrong?

Fl0rn · « **Reply #4781 on:** July 31, 2016, 08:28:55 pm »

Quote from: scott on July 31, 2016, 06:57:13 pm

I get this after i open up AbyssInjector.exe https://puu.sh/qlmfj/574dfa5955.png , it lets me continue though and then the injector cannont find the DLL https://puu.sh/qllQw/9e4e7e6714.png , am i doing something wrong?

Lacking a more adequate answer, for now i would suggest trying to see if you can repair your .net framework installation. Otherwise see about downloading the most recent version for your OS or hardware. Don't know all the ins and outs of this, as i don't remember if i've even done this before. So for that reason all i'm gonna say is to use google, or wait and hope someone can offer you a more desirable and helpful response.

Rydian · « **Reply #4782 on:** July 31, 2016, 11:52:48 pm »

.NET versions aren't backwards compatible, major branches exist simultaneously on the system.

I'd suggest uninstalling all 3.x and up versions from the control panel, then restarting and installing the latest version 4 from Microsoft's site.
https://www.microsoft.com/en-us/download/details.aspx?id=17851

Happix100 · « **Reply #4783 on:** August 01, 2016, 03:32:17 am »

Just a dumb question here, but is there any way to multi-client with around 4 clients running at once? It looks like the launcher only lets you run two at once, and that's just nooooo good.

Chocobubba · « **Reply #4784 on:** August 01, 2016, 04:29:56 pm »

Quote from: Happix100 on August 01, 2016, 03:32:17 am

Just a dumb question here, but is there any way to multi-client with around 4 clients running at once? It looks like the launcher only lets you run two at once, and that's just nooooo good.

Yeah, I did it just the other day without issue. I just left the injector open and used a direct launch link to launch the client every time.

Happix100 · « **Reply #4785 on:** August 01, 2016, 04:41:26 pm »

Quote from: Chocobubba on August 01, 2016, 04:29:56 pm

I just left the injector open and used a direct launch link to launch the client every time.

I guess that means you're using the injector that doesn't have the attached client launcher? Every time I try to open more than two (closing the injector after each of the two successful launches) it always just says "Client's already running". I assume that's because the thing's trying to run a different, patched version of the client twice and going "Naw man, that's already running."

Which... I guess that would mean I'd need the injector without the "Launch Client" option and then use the old injector with the, uh, "MabiDirectLauncher" thing? The old injector without the client launching option isn't anywhere, though. Blegh.

For reference, this is how it looks when I try to run more than two: http://puu.sh/qmupD/55ae420d2c.jpg

Chocobubba · « **Reply #4786 on:** August 01, 2016, 08:40:15 pm »

Quote from: Happix100 on August 01, 2016, 04:41:26 pm

I guess that means you're using the injector that doesn't have the attached client launcher? Every time I try to open more than two (closing the injector after each of the two successful launches) it always just says "Client's already running". I assume that's because the thing's trying to run a different, patched version of the client twice and going "Naw man, that's already running."

Which... I guess that would mean I'd need the injector without the "Launch Client" option and then use the old injector with the, uh, "MabiDirectLauncher" thing? The old injector without the client launching option isn't anywhere, though. Blegh.

For reference, this is how it looks when I try to run more than two: http://puu.sh/qmupD/55ae420d2c.jpg

I'm just using the "AbyssInjector.exe" that comes with Abyss and unticking the close after successful inject option. After that I use a direct launch shortcut, but any direct launch method should work.

Happix100 · « **Reply #4787 on:** August 01, 2016, 11:20:05 pm »

Quote from: Chocobubba on August 01, 2016, 08:40:15 pm

I'm just using the "AbyssInjector.exe" that comes with Abyss and unticking the close after successful inject option. After that I use a direct launch shortcut, but any direct launch method should work.

Weeeell, this isn't working for me with 3+ clients. I can only open up a second one before it tells me that another Mabinogi Client is running already. Guess I might be missing something. Thank you though!

Edit: Okay I got it. So, I had to leave the injector open instead of closing it and opening it again. I guess that's a little obvious, but whenever I left it open, it wouldn't inject. So I finally clicked "Update Timer" after every successful injection and, viola, it's injecting without me needing to close it and multi-clienting past two now. Woops.

WiNgEdCoW+MaRi=JeBuS · « **Reply #4788 on:** August 02, 2016, 02:14:55 am »

Sorry I don't know if anyone's mentioned this but screen cut skip in abyss causes the player to load into a black background, unable to move while moving into renes. I was entering g8 final for my meteor training when this happened and disabling it fixed the problem.

Blade3575 · « **Reply #4789 on:** August 02, 2016, 02:20:33 am »

Quote from: Happix100 on August 01, 2016, 11:20:05 pm

Weeeell, this isn't working for me with 3+ clients. I can only open up a second one before it tells me that another Mabinogi Client is running already. Guess I might be missing something. Thank you though!

Edit: Okay I got it. So, I had to leave the injector open instead of closing it and opening it again. I guess that's a little obvious, but whenever I left it open, it wouldn't inject. So I finally clicked "Update Timer" after every successful injection and, viola, it's injecting without me needing to close it and multi-clienting past two now. Woops.

I think I have a fix for that. After I get someone to test it I will upload it if it is working as intended. I ran a few tests but I would rather be sure.

Quote from: WiNgEdCoW+MaRi=JeBuS on August 02, 2016, 02:14:55 am

Sorry I don't know if anyone's mentioned this but screen cut skip in abyss causes the player to load into a black background, unable to move while moving into renes. I was entering g8 final for my meteor training when this happened and disabling it fixed the problem.

On a related note:
Would having an option to make it so it doesn't skip user defined cutscenes be a feature people would want? It was something I had already figured out and had contemplated implementing, but never really bothered to.

Fl0rn · « **Reply #4790 on:** August 02, 2016, 09:05:56 am »

Quote from: Blade3575 on August 02, 2016, 02:20:33 am

On a related note:
Would having an option to make it so it doesn't skip user defined cutscenes be a feature people would want? It was something I had already figured out and had contemplated implementing, but never really bothered to.

Yes. Cuz there's one in saga ep 10, after you beat macha, that will always lock my mouse from doing anything besides moving. I have to kill and restart the client to get it working again, and if scene skip is still on when i talk to akule or whoever, since i didn't get to talk to tarlach, it will repeat the process.

Blade3575 · « **Reply #4791 on:** August 02, 2016, 12:39:51 pm »

Quote from: Blade3575 on October 27, 2012, 04:23:30 am

Update Log:
August 2, 2016: Updated AbyssInjector to properly respond to launching multiple Clients while keeping it open.

Dizzymoon · « **Reply #4792 on:** August 03, 2016, 09:51:18 am »

I'm having a ton of trouble trying to get this to work, and I'm pretty sure im not supposed to be having this much trouble with it, or at least im not aware that it's working

Pretty much, I put Abyss into my Mabinogi folder (i run it through steam fyi) and I run it, Mabinogi opens up, i log in , everything runs fine, but I can't seem to get any of the functions of Abyss working? None of the slash commands work and pretty much the only this is that I can see the HP of NPCs and that's it.

Rydian · « **Reply #4793 on:** August 03, 2016, 01:00:03 pm »

"I run it" means what, exactly?

GiratinaAltered · « **Reply #4794 on:** August 03, 2016, 01:00:22 pm »

Quote from: Dizzymoon on August 03, 2016, 09:51:18 am

I'm having a ton of trouble trying to get this to work, and I'm pretty sure im not supposed to be having this much trouble with it, or at least im not aware that it's working

Pretty much, I put Abyss into my Mabinogi folder (i run it through steam fyi) and I run it, Mabinogi opens up, i log in , everything runs fine, but I can't seem to get any of the functions of Abyss working? None of the slash commands work and pretty much the only this is that I can see the HP of NPCs and that's it.

Did you run the Abyss Injector? You have to injected Abyss rather than put everything into the folder and expect to run as it normally would before the updates.

Dizzymoon · « **Reply #4795 on:** August 03, 2016, 03:55:12 pm »

Quote from: GiratinaAltered on August 03, 2016, 01:00:22 pm

Did you run the Abyss Injector? You have to injected Abyss rather than put everything into the folder and expect to run as it normally would before the updates.

Yeah, I forgot to mention that. I've run it through the injector, and I've fiddled with the injection times and detection times. Still the only noticable difference is that I can see NPC and other people's HP bars, but nothing else works, maybe I'm just trying to use the slash commands wrong?

I just type into the chat like /-insert name of command here- and nothing is happening (like /housing)

Quote from: Rydian on August 03, 2016, 01:00:03 pm

"I run it" means what, exactly?

I mean that I ran AbyssInjector in administrator mode

UPDATE: I got it working, I simply just used a different injector and it worked!

spirit2roam · « **Reply #4796 on:** August 04, 2016, 02:25:00 pm »

Not sure what's wrong with my AbyssInjector since it keeps saying that it cannot detect Abyss even though both the custom injector and the Abyss.ini are in the client's folder. I checked the past couple pages of this thread, but I couldn't see one fix for it yet.

kilo511 · « **Reply #4797 on:** August 05, 2016, 12:35:49 am »

Quote from: spirit2roam on August 04, 2016, 02:25:00 pm

Not sure what's wrong with my AbyssInjector since it keeps saying that it cannot detect Abyss even though both the custom injector and the Abyss.ini are in the client's folder. I checked the past couple pages of this thread, but I couldn't see one fix for it yet.

did you also place the RenameMe.dll file in the folder as well?

donavankelley · « **Reply #4798 on:** August 05, 2016, 02:06:39 am »

Finally figured out why I couldn't run abyss injector, power archiver wouldn't extract the file right for some reason, ended up downloading WinRAR and extracted it cleanly, now I'm able to run abyss injector.

spirit2roam · « **Reply #4799 on:** August 05, 2016, 07:07:32 am »

Quote from: kilo511 on August 05, 2016, 12:35:49 am

did you also place the RenameMe.dll file in the folder as well?

I did, and still nothing. But, wouldn't that be counter intuitive anyways since NGS detects any foreign .dll? I digress though. I tried updating my .NET framework, but it says that it already is updated. Aside from that, I don't know what else to try.

Erinn Time	14:58
Local	01:34
Server	01:34

11:11	Tir Chonaill
12:22	Dunbarton
13:33	Emain Macha
14:44	Bangor
14:44	Emain Macha
16:66	Emain Macha

01:12	Emain Macha - Island in South Pathway
01:48	Sen Mag 5th house from West

01:39	Resting
02:15	Resting

News

Mabinogi Status

Erinn Timer

Time

Moongate Prior G16 [ + / - ]

Price [ + / - ]

Rua [ + / - ]

Themes

Author Topic: [September 3, 2023]Abyss Patcher (Read 359160 times)

An Error Has Occurred!