[September 3, 2023]Abyss Patcher

[Rydian]

slash commands in general seem to be borked for me, bitmap fonts are off too, so is scouter... T_T

Mabi update replaced one of the files, reinstall Abyss.

[strkid97]

After I installed abyss, the cilent seems to be crashing a lot. I dont know if its just me but also when it crashes and I open a second cilent after that, that cilent becomes unresponsive when I enter a channel from character select but the next cilent works. This only happens when im using abyss.

[Sy­­­­­­­­]

Bugle to System message oddly fails, and apparently has been failing for a while, even with new modded ijl15.dll it fails.

[10/08/14 19:51:59] - Abyss: Bugle to System Message patch failed: search (1)

[Armchair]

Bugle to System message oddly fails, and apparently has been failing for a while, even with new modded ijl15.dll it fails.

[10/08/14 19:51:59] - Abyss: Bugle to System Message patch failed: search (1)

[10/08/14 12:29:03] - Abyss: Bugle to System Message patch succeeded.

[xDesPaiRx]

If anyone could be of assistance I'd greatly appreciate it. I haven't been able to run updated abyss for a while now. I'm stuck using the ijl15.dll from february. Every single time I try using the newer versions client.exe shows up for 5-10 seconds in my processes and closes. I actually managed to get mabi to run with the recently updated ijl5 but it only happened once. I closed mabi to fix my window position cordinates in abyss and once I started mabi it began to crash again. I removed the window position mod and it didn't seem to be the problem since the game continued to crash. If anyone has any insight on my problem I thank you beforehand, I'll be checking up on the thread in case someone responds.

[Rydian]

If anyone could be of assistance I'd greatly appreciate it. I haven't been able to run updated abyss for a while now. I'm stuck using the ijl15.dll from february. Every single time I try using the newer versions client.exe shows up for 5-10 seconds in my processes and closes. I actually managed to get mabi to run with the recently updated ijl5 but it only happened once. I closed mabi to fix my window position cordinates in abyss and once I started mabi it began to crash again. I removed the window position mod and it didn't seem to be the problem since the game continued to crash. If anyone has any insight on my problem I thank you beforehand, I'll be checking up on the thread in case someone responds.

Try debug and extrathreads to 0.

[Hasbros]

i get stuck to the engine  loading. i tryed setting debug and extrathreads to 0 and i still can't get it to work .  halp pls

[Sy­­­­­­­­]

[10/08/14 12:29:03] - Abyss: Bugle to System Message patch succeeded.

Gee this sure is helpful as I already stated I have the newest abyss, and lo and behold. The same darn stats as seen in that image.

[xDesPaiRx]

Try debug and extrathreads to 0.

Oh, that worked. Thanks!

[Slink]

So ever since I put in the latest version of abyss two days ago, I haven't been able to even get mabi running. When I go to start the game up, that window that you see for less than a second pops up (the one that kind of looks like a chalkboard), followed by crackshield doing its thing, & that's all that'll happen. However for a few lucky times, the client actually shows up, but then just stops responding at any random point before I can even log on a character. USUALLY if it stops responding, I just need to let it be for up to a few seconds for it to get back to normal.

I've tried almost everything I could think of. Re-installed mabi at least five times, disabling debug & extrathreads in abyss, & restarting my computer. I say "almost" because I have no way of trying out older versions of abyss, partly cause I don't know if there's an archive somewhere or not (but also cause stupid me didn't think to move the last version I had OUT of the root folder before permanently deleting all the files before re-installing the game). I'm pretty sure it has something to do with ijl15.dll, but I might be wrong.

Other than that, it works fine without any modding. But considering everyone else seems to have their mods working just fine, I'd really just like to be able to play mabi with both data & patcher mods. I can paste what the log says, but it doesn't always say the same thing everytime I try to start mabi. Windows 8 if that helps.

[Rydian]

Does starting the client directly work?

Make a shortcut to client.exe and in the properties, edit the "target" so it's sort of like this.

Code: [Select]

C:\Nexon\Mabinogi\Client.exe code:1622 ver:189 logip:208.85.109.35 logport:11000 chatip:208.85.109.37 chatport:8002 setting:"file://data/features.xml=Regular, USA"
After "Client.exe", put a space and then copy-paste the rest.

[kilo511]

i get stuck to the engine  loading. i tryed setting debug and extrathreads to 0 and i still can't get it to work .  halp pls

remove your data folder.

[Slink]

Does starting the client directly work?

Make a shortcut to client.exe and in the properties, edit the "target" so it's sort of like this.

Code: [Select]

C:\Nexon\Mabinogi\Client.exe code:1622 ver:189 logip:208.85.109.35 logport:11000 chatip:208.85.109.37 chatport:8002 setting:"file://data/features.xml=Regular, USA"
After "Client.exe", put a space and then copy-paste the rest.

I really wish it was that simple, but unfortunately that didn't work.  I suspect it has to do with the latest abyss ijl15.dll, but I have no way of ruling that out unless I can get an older version of it. I've read the first post to see if there was ANYTHING that I was missing or doing wrong, but I didn't find anything. I have not used pake either, so there should be no way that I got blocked from using abyss.

I'd just really like help here....It's frustrating the crap out of me that all of a sudden abyss doesn't wanna work for me when absolutely no one else is having the same problem. I'd be fine with having to go modless if zoom & bitmap font could be used via data folder or were already incorporated in the game. (And before it gets mentioned, yes I know about the zoom slider that's in the options. It still feels limiting though.)

[BeastExe]

I really wish it was that simple, but unfortunately that didn't work.  I suspect it has to do with the latest abyss ijl15.dll, but I have no way of ruling that out unless I can get an older version of it. I've read the first post to see if there was ANYTHING that I was missing or doing wrong, but I didn't find anything. I have not used pake either, so there should be no way that I got blocked from using abyss.

I'd just really like help here....It's frustrating the crap out of me that all of a sudden abyss doesn't wanna work for me when absolutely no one else is having the same problem. I'd be fine with having to go modless if zoom & bitmap font could be used via data folder or were already incorporated in the game. (And before it gets mentioned, yes I know about the zoom slider that's in the options. It still feels limiting though.)

I had a similar issue of the game not responding, usually right before entering the game. I found setting datafolder to 0 solved this issue. Maybe try that? (I didn't have the issue of the client not opening though.)

[Slink]

I had a similar issue of the game not responding, usually right before entering the game. I found setting datafolder to 0 solved this issue. Maybe try that? (I didn't have the issue of the client not opening though.)

Oh my god, thank you so much! I didn't have my data folder in the root folder, so I had my doubts about that fix. I did it anyways & even though it may just work this once for all I know, I actually was able to log into the game. I'm pretty happy right now, thank you!

[lilhermit]

Hi, I downloaded the abyss file and when I try opening mabinogi, I get a white screen before I can log in. help please?
I also ran hackshield too.

[chaoticoracle225]

So ever since I put in the latest version of abyss two days ago, I haven't been able to even get mabi running. When I go to start the game up, that window that you see for less than a second pops up (the one that kind of looks like a chalkboard), followed by crackshield doing its thing, & that's all that'll happen. However for a few lucky times, the client actually shows up, but then just stops responding at any random point before I can even log on a character. USUALLY if it stops responding, I just need to let it be for up to a few seconds for it to get back to normal.

I've tried almost everything I could think of. Re-installed mabi at least five times, disabling debug & extrathreads in abyss, & restarting my computer. I say "almost" because I have no way of trying out older versions of abyss, partly cause I don't know if there's an archive somewhere or not (but also cause stupid me didn't think to move the last version I had OUT of the root folder before permanently deleting all the files before re-installing the game). I'm pretty sure it has something to do with ijl15.dll, but I might be wrong.

Other than that, it works fine without any modding. But considering everyone else seems to have their mods working just fine, I'd really just like to be able to play mabi with both data & patcher mods. I can paste what the log says, but it doesn't always say the same thing everytime I try to start mabi. Windows 8 if that helps.

running into this same problem myself. I found that with updated abyss is unreliable. With every setting turned off to 0, it crashes after I click Start at the character selection on my main but it lets me log in on my alt. I can sign in successfully with an old ijl15.dll from Feb as well and a clean client works as well. Not sure whats wrong the updated abyss.

[SaraBBrown]

Well I downloaded Abyss and can't seem to get it to do anything. It required that I turn the crackshield on before I can log into it. The debug ,extra threads, and data folder all have to be set to 0 for the game to run without running into error other people are getting. I'm running on a x64 system (if it matters).
Pretty much all I want out of this is the Scouter and Zoom mods to work. (In the .ini they're both set to "1".) Anyone know what stupid mistake I'm making? -Thank you

[Rydian]

If Mabi updated after you installed abyss, download the latest abyss because the latest mabi update overwrote a file.

You don't need data folder on for scouter and zoom, as those are core abyss mods and not pulled from the data folder.

[Halvaard]

Okay, any ideas on this one?
I re installed Abyss, most things that i care about work, but /housing does not.
When I attempt to use /housing in the housing district, the game freezes.
When used in other areas, it brings up the cinema style screen that hides part of the top and bottom of your screen but the housing board does not appear and the only way to regain control of my character at that point is to change channels...

[ImagineA]

Okay, any ideas on this one?
I re installed Abyss, most things that i care about work, but /housing does not.
When I attempt to use /housing in the housing district, the game freezes.
When used in other areas, it brings up the cinema style screen that hides part of the top and bottom of your screen but the housing board does not appear and the only way to regain control of my character at that point is to change channels...

To my understanding most slash commands are broken, so you'll just have to wait for a fix

[Blade3575]

To my understanding most slash commands are broken, so you'll just have to wait for a fix

As far as I know, just that one is. Correct me if I am wrong, though. When I updated to the new board for the swap, it turns out the new board needs a class. I'll look into it at some point, but this one is a real pain.

[Halvaard]

Awe well that stinks, thanks for letting us know though.
Guess I'll just use mabinogier.com's housing thingy to reprice my stuff untill then.

[Blade3575]

Awe well that stinks, thanks for letting us know though.
Guess I'll just use mabinogier.com's housing thingy to reprice my stuff untill then.

You can still access the board through the party windows fine; it's just the command that's broken.

[ImagineA]

As far as I know, just that one is. Correct me if I am wrong, though. When I updated to the new board for the swap, it turns out the new board needs a class. I'll look into it at some point, but this one is a real pain.

Also the /reloadini command just makes my game instacrash, dunno if you knew about that one